Pioneer SP-C21 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de altavoces Pioneer SP-C21. Pioneer SP-C21 17 páginas. Pyle audio speaker system user manual
También para Pioneer SP-C21: Hoja de especificaciones (1 páginas)

Imprimir página

ENGLISH

www.pioneerelectronics.com

CONNECTING YOUR SYSTEM

IMPORTANT: Make sure all equipment is turned off before making any connections.

Correct wiring of your loudspeakers is essential for achieving the best sound quality. Be careful to ensure

proper polarity of connection. We recommend a minimum of 18 gauge for runs up to 25 feet, and thicker for

longer runs.

Most loudspeaker cable is coded to ease this task. Typically the ribbed or striped side is connected to the

positive (red) terminal. Make sure that the amplifier positive (red) terminal is connected to the loudspeaker

positive (red) terminal. Strip off ½" of insulation from the ends of the cable, twist the bare strands and insert

into the binding posts. Take care that no stray strands of wire short across between the terminals.

1: Strip the cover and twist the strands

Negative

Wire going to negative

terminal of receiver

2: Connect each speaker cable (not supplied) to one set of

the receiver's speaker output terminals and the speaker input

terminals. The red terminal is the positive (+), and the black

Négative

terminal is the negative (–). Make sure that the receiver positive

(red) terminal is connected to the speaker positive (red) terminal.

INSTALLING THE BASE TO THE SP-FS51-LR

Fil allant vers la borne

FLOORSTANDING SPEAKERS

négative du récepteur

Included in the SP-FS51-LR carton are (2) bases and (8)

screws. Attach the base to the bottom of each speaker

using (4) screws, as illustrated. (Screwdriver is not included.)

Negativo

USING FEET WITH THE SP-C21 CENTER-

CHANNEL SPEAKER

Included in the SP-C21 carton are (2) feet for the SP-C21

to rest on. Place the feet at the desired location of the

Alambre que va al terminal

speaker. They can be spaced a variety of widths apart

negativo del receptor

for installation flexibility. Once the SP-C21 is placed on

the feet, tilt the speaker to the desired angle, depending

on the location of the speaker in relation to the desired

listening position.

NOTE: Do not use adhesive or screws to attach the feet

to the speaker. Doing this will damage the cabinet and

void the warranty.

PLACEMENT AND FINE TUNING

Correct placement is important for maximizing the sound

quality of your loudspeaker system. Take time to experiment

with positioning according to the guidelines below.

Using the SP-FS51-LR or SP-BS21-LR as Front and

Surround Speakers

For best results the tweeter should be positioned near

ear level and the loudspeakers separated a distance

approximately equal to the listening distance. Angling the

loudspeakers inward towards the listener will improve the

image stability for non-central listeners. Close proximity

to a side or rear wall will enhance the bass performance,

although too close (particularly a corner location) and the

bass may be unnaturally high and image performance

may be degraded. Best results will be obtained when

the loudspeaker is placed approximately 2 feet from the

wall. If a corner location is unavoidable, try to position the

loudspeaker so that the distance to the rear wall is not

equal to the distance to the side wall.

Positive

Wire going to positive

terminal of receiver

Positive

Fil allant vers la borne

positive du récepteur

Positivo

Alambre que va al terminal

positivo del receptor