Pioneer Elite PRO-1000HDI Manual de instrucciones - Página 28
Navegue en línea o descargue pdf Manual de instrucciones para Monitor Pioneer Elite PRO-1000HDI. Pioneer Elite PRO-1000HDI 48 páginas. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
También para Pioneer Elite PRO-1000HDI: Listas de piezas de referencia rápida (12 páginas)
Imprimir página
Operations
Screen Size Selection
This unit incorporates screen modes of various height and
width ratios. For optimal viewing, we recommend that
you select the screen mode that best matches the video
source that you are viewing. Although these modes are
designed for full display of a picture on a wide screen, it is
our hope that you make use of them with a full
understanding of the manufacturer's intentions.
Changing the screen size
The size of the picture or the picture's range projected on
the screen can be changed between 4 screen sizes
described in the table on this page.
Press SCREEN SIZE to select the size.
The screen size changes each time SCREEN SIZE is
pressed as follows.
[During video signal input]
3 WIDE
ZOOM 2
[During personal computer signal input]
3 DOT BY DOT
FULL 2
Consult the table Computer Signal Formats Supported
(pages 39 and 40) for information regarding screen sizes
supported by each signal format.
Notes
÷ When the WIDE, ZOOM or FULL setting is used to display a
non-wide screen 4:3 picture fully on a wide screen, a portion
of the picture may be cut off or appear deformed.
÷ Be aware that when the display is used for commercial or
public viewing purposes, selecting the WIDE, ZOOM or FULL
mode settings may violate the rights of authors protected
under copyright law.
÷ When DOT BY DOT or 4:3 screen sizes are selected, the
display position is moved slightly each time the power is
turned on, in order to prevent image burning.
Moving the screen position
upward or downward
When a vista size movie etc., is viewed at the ZOOM
setting, the image may not be centered on the screen,
and may extend past the edge of the screen.
In this case, adjust the screen to an clearly viewable
position using 5/∞.
Automatic screen size
When a High-Definition Television signal (1080i, 720p,
1080p) is detected, the screen size is automatically
changed to FULL.
24
I
I
PRO-1000HD
/ PRO-800HD
During video signal input
How the picture looks
During personal computer signal input
1 DOT BY DOT
3 4:3
The input signal and the screen maintain a dot to line ratio
FULL 2
of 1:1 and is thus highly faithful to the source.
[PRO-1000HD
3 4:3
[PRO-800HD
* The PRO-800HD
2 4:3
The display fills the screen
as much as possible without
altering the aspect ratio of
the input signal.
Note:
When viewing at aspect ratio 4:3 continuously for numerous hours,
or for repeated short periods of time each day, some after image
may be burned into the screen.
To avoid such burning of after images in the screen, use aspect ratios
other than 4:3 whenever possible, unless necessary to avoid
infringement of copyright.
WIDE
Suitable for when viewing news or
sports programs. Movies or sports
programs can be viewed with an
expansive powerful image.
4:3
Suitable for when viewing news or
sitcoms. The video software can be
viewed in its original screen frame
size. (To prevent screen burn on this
display, the displayed position of the
screen frame will be slightly different
each time the power is turned on.)
FULL
Suitable for wide screen images
(squeeze).
ZOOM
Mainly suitable for viewing
Cinemascope size and other such
movie images.
Provides a more expansive, powerful
image.
I
]
A
640 dots
1280 dots
I
]
I
is designed with horizontally oblong
elements, with the result that the image displayed will
appear more oblong than the original input signal.
A
640 dots
1024 dots
A
480
768
lines
lines
(Illustration shows
640 x 480 input.)
480
768
lines
lines
(Illustration shows
640 x 480 input.)
3 FULL
The display is presented
with a widescreen aspect
ratio of 16:9 and fills the
entire screen.
A