Pioneer PDP 424MV Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Monitor Pioneer PDP 424MV. Pioneer PDP 424MV 39 páginas. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
También para Pioneer PDP 424MV: Folleto y especificaciones (2 páginas), Listas de piezas de referencia rápida (12 páginas)
Imprimir página
Installation
You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:
* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the
monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.
* Do not touch or hold the screen face when carrying the unit.
• This device cannot be installed on its own. Be sure to use a stand or original mounting unit. (Wall
mount unit, Stand, etc.)
* See page 1.
• For correct installation and mounting it is strongly recommended to use a trained, authorized
dealer.
Failure to follow correct mounting procedures could result in damage to the equipment or injury
to the installer.
Product warranty does not cover damage caused by improper installation.
* Use only the mounting kit or stand provided by manufacturer and listed under Options.
Drawing A
Ventilation Requirements for
enclosure mounting
To allow heat to disperse, leave space between surrounding
objects as shown on the diagram below when installing.
50
(2")
mm
2
En
Wall
50
(2")
mm
Drawing B
How to use the safety metal fittings
and the screws for safety metal
fittings
These are fittings for fastening the unit to a wall to prevent
tipping due to external shock when using the stand
(optional). Fasten the safety fittings to the holes in the
back of the monitor using the safety fitting mount screws.
Wall
Safty metal fittings
Screw for Safty metal
fittings
50
(2")
mm
Metal chain
(Not supplied)
Screw hole
Screw or Hook etc.
(Not supplied)
Wall
Table Top