Pioneer PDP-50MXE20 Manual de inicio - Página 15

Navegue en línea o descargue pdf Manual de inicio para Monitor Pioneer PDP-50MXE20. Pioneer PDP-50MXE20 46 páginas. Pioneer flat panel television - plasma tv user manual

Imprimir página

Power cord connection

Connect the power cord after all component connections

have been completed.

AC IN

Connect the power cord to this unit.

Plug the power cord into a power outlet.

CAUTION

÷ Use only the power cord provided.

÷ For the Plasma Display, use a three-core power cord with a

ground terminal.

Always be sure to connect the power cord to a three-pronged

grounded outlet and make sure that the cord is properly

grounded. If you use a power source converter plug, use an

outlet with a ground terminal and screw down the ground line.

NO!

Do not use a power supply voltage other than that indicated (AC

100 V to 240 V, 50 Hz/60 Hz) as this may cause fire or electric

shock.

Attaching the ferrite cores

Attach the accessory ferrite core to the end of the power

cord as shown in the accompanying illustration. Use the

provided cable tie to prevent the ferrite core from slipping

on the cable.

If you do not do this, this monitor will not conform to

mandatory CE or C-Tick standards.

To power

outlet

AC power cord

Ferrite core

Cable tie

To AC IN

As close as possible

Installation and Connections

Note

Regarding the audio cable, attach the supplied ferrite core.

Wind the audio cable (not supplied) around the ferrite core once,

and then fasten the catch.

If you do not do this, this monitor will not conform to mandatory

CE or C-Tick standards.

Audio cable (not supplied)

Ferrite core