Ariston LIE2C19 A Manual de consulta diaria - Página 6

Navegue en línea o descargue pdf Manual de consulta diaria para Lavavajillas Ariston LIE2C19 A. Ariston LIE2C19 A 9 páginas.

CARE AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

Regularly clean the filter assembly so that the filters do not clog and

that the waste water flows away correctly.

The filter assembly consists of three filters which remove food residues

from the washing water and then recirculate the water: to obtain the

best washing results, you need to keep them clean.

The dishwasher must not be used without filters or if the filter is

loose.

After several washes, check the filter assembly and if necessary clean it

thoroughly under running water, using a non-metallic brush and

following the instructions below:

1. Turn the cylindrical filter A in an anti-clockwise direction and pull it

out (Fig 1).

2. Remove the cup filter B by exerting a slight pressure on the side

flaps (Fig 2).

3. Slide out the stainless-steel plate filter C (Fig 3).

4. Inspect the trap and remove any food residues. NEVER REMOVE the

wash-cycle pump protection (black detail) (Fig 4).

After cleaning the filters, re-place the filter assembly and fix it in

position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may become encrusted onto the spray arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and clean

them with a small non-metallic brush.

To remove the upper spray arm, turn the plastic locking ring in an anti-

clockwise direction. The upper spray arm should be replaced so that

the side with the greater number of holes is facing upwards.

The lower spray arm may be removed by pulling it upwards.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free of

impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked and

damage the dishwasher.