Aeotec MultiSensor 7 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Accesorios Aeotec MultiSensor 7. Aeotec MultiSensor 7 5 páginas.
También para Aeotec MultiSensor 7: Manual del usuario (8 páginas)

Imprimir página
Aeotec MultiSensor 7 Manual del usuario
1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover off.
2. Insert the microUSB of the provided USB cable into your sensor's microUSB port.
3. Insert the larger end of the USB cable into a computer or any 5V adapter which will immediately power your MultiSensor 7.
4. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT.
For a battery powered installation (acts as a sleeping device upon initial pair):
1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover off.
2. Insert two CR123A lithium batteries orientated according to the diagram within your sensor.
Try inserting the batteries flat rather than at an angle.
Note: MultiSensor 7 can be powered by a single CR123A (doesn't matter which port), though batteries will require changing more frequently (ha
WARNING: Not compatible to rechargeable CR123A batteries (3.6V).
3. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT.