DINGO K9-2 Manual de uso y mantenimiento - Página 9
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Tractor DINGO K9-2. DINGO K9-2 20 páginas. Handyman
Imprimir páginaOperation-
Pre Start-Up (daily)
Become familiar with this manual and the
engine manual. Before commencing
operation each day perform the following
pre start checks;
MACHINE
Fuel level - fill to 60mm from the
top ( do not overfill)
Engine oil level (refer to engine
manual)
Remove all debris from the
machine
Check air filter and clean if
necessary
Check bushes and pins for wear
Check tyre pressure (25-35psi)
Check fans and cooling ventilation
are clean and clear from
obstruction
Check for leaks (oil and fuel)
Check for any damaged & loose
components
IMPORANT Check wheel nuts
(85flb/115nm) daily for first 6 days
of operation
OPERATOR
Operator has been trained in safe
use of machine
Operator is competent for the
intended use (including competent
in the use of relevant attachments)
Operator has appropriate clothing
and personal protective equipment;
•
Fully enclosed non slip footwear
(safety boots)
•
Long pants and shirt
•
Safety glasses
•
Hard hat if working in areas with a risk of
falling items or overhead obstacles
•
Hearing protection
Operator is supervised if
undergoing training
WORK AREA
Ground conditions are firm and
stable
Dingo K9-2 Operation & Maintenance Manual
Pre Start-Up
Sloping ground has been identified
Holes have been identified and
isolated
Embankments have been marked
Tree stumps, rocks and other
hazards have been identified
Water courses (dams, creeks,
rivers) have been clearly marked
Underground and aboveground
services have been identified and
isolated if necessary
Site physical hazards have been
identified
Dust, noise, traffic and other
adverse conditions have been
controlled
Persons not involved in the work
have been excluded from the area.
Children and animals have been
removed from the area
Adding Fuel
Labelling on the fuel tank tells whether a
machine requires petroleum fuel. For fuel
type and information on suitable additives
refer to Engine Manual as supplied. (NB. If
labelling becomes lost or damaged order
replacements from your Dingo
representative) & fit to machine. For
recommended fuel see Engine Manual.
1 Position Dingo on level surface, lower the
Dingo arms and turn off the engine (turn
ignition key to off). Remove the key.
2 Clean around the fuel tank cap and
remove the cap. Use a funnel to add fuel as
specified above to the fuel tank, filling until
the fuel reaches 60 - 70 mm below the top
of the tank. This space is needed to allow
the fuel room to expand. Do not fill the fuel
tank completely full.
3 Replace the fuel cap securely. Clean away
any fuel that may have spilt.
DANGER - Petroleum can be extremely
flammable and highly explosive.
To avoid a fire or explosion that may burn
yourself, other, or cause property
damage:-
9