Aeotec Nano Switch Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Interruptor Aeotec Nano Switch. Aeotec Nano Switch 18 páginas. Nano switch

If the Nano Switch has been successfully added

to your Z-Wave network, its RGB LED will be

solid. If the pairing was unsuccessful, the red

LED will be on for 2 seconds and then remain a

colourful gradient, repeat the instructions above

from step 1.

With your Nano Switch now working as a part of

your smart home, you'll be able to configure it from

your home control software/phone application.

Please refer to your software's user guide for further

instructions on configuring Nano Switch to your

needs.

4 Removing Nano Switch from a Z-Wave

network.

Your Nano Switch can be removed from your Z-Wave

network at any time. You'll need to use your Z-Wave

network's main controller. To set your Z-Wave

controller/gateway into removal mode, please refer

to the respective section within your controller

instruction manual.

Set your Z-Wave controller into removal mode.

Press the Action Button on the Nano Switch or

toggle the external manual switch 3 times in fast

succession.

If the Nano Switch has been successfully

removed from your Z-Wave network, its RGB

LED will remain colourful gradient. If the removal

was unsuccessful, the RGB LED will still be solid

(following the state of the output load), repeat the

instructions above from step 1.

5 Advanced functions.

Changing mode on the External Switch/Button

Control.

The Nano Switch can be controlled via 2-state (flip/

flop) external/manual switch, momentary push

button or the 3-way switch. To automatically detect

and set the mode to the appropriate type of manual