Ariston Contract STI 300 indirect Manual de instrucciones para la instalación - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para la instalación para Caldera Ariston Contract STI 300 indirect. Ariston Contract STI 300 indirect 24 páginas. Unvented hot water storage cylinders
También para Ariston Contract STI 300 indirect: Manual de instrucciones de instalación (20 páginas)
Imprimir página
1.
GENERAL
INFORMATION
1.2
D
ELIVERY
This manual is an integral and essential part of the product. It should be kept
with the appliance so that it can be consulted by the user and our authorised
personnel.
Please read carefully the instructions and notices about the appliance
contained in this manual, as they provide important information regarding the
safe installation, use and maintenance of the cylinder.
Failure to do so may invalidate the guarantee.
The range is available with the following options:
The Wall-hung range (50, 75, 100 litre models), which are supplied as the
following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve,
immersion heater and thermostat with thermal cut-out.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish).
The Ariston Contract and the Ariston Comfort (indirect only) floor-standing
range (125, 150, 200 and 300 litre models).
The Contract is supplied with the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
2) Immersion heater(s) and thermostat(s) with thermal cut-out(s) (not fitted).
3) Cylinder thermostat with thermal cut-out (indirect only).
4) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish) and separate motorised valve (indirect only).
The Comfort is supplied with the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
2) Factory fitted immersion heater and thermostat with thermal cut-out (dry
pocket).
3) Factory fitted cylinder thermostat with thermal cut-out.
4) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish) and separate motorised valve.
The High Capacity floor-standing range (500 litre models), which are
supplied as the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve,
immersion heater and thermostat with thermal cut-out.
2) Cylinder thermostat with thermal cut-ou (indirect only).
3) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, cold water combination valve,
tundish) and separate motorised valve (indirect only).
3