Aeotec MultiSensor 7 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad Aeotec MultiSensor 7. Aeotec MultiSensor 7 5 páginas.
También para Aeotec MultiSensor 7: Manual del usuario (8 páginas)

Imprimir página

1. Press and hold Multisensor 7 Action button

2. Wait until the LED turns into a solid orange color (2 - 5 seconds)

3. Release Multisensor 7 Action Button, the LED should remain solid

If the MultiSensor 7 LED

1-3 again, then power up your hub again.

4. Tap the Action Button on Multisensor 7 to put Multisensor 7 back to sleep, or wait 5 minutes. (recommended to manually put it back to sleep to co

Advanced settings of MultiSensor 7.

There are further advanced parameter settings and group association settings not listed in this guide. You can find the attachment of the advanced engine

which will give you all possible functions of the MultiSensor 7 that may be missing in this guide.

The PDF guide will feature these missing advanced settings:

Parameter settings (Configuration Command Class)

Group Association (Association Command Class)

You may download the engineering sheet below:

orange

LED turns off right away, this would indicate that your hub is putting your device to sleep. Try unpowering yo

while it is awake. Send any configurations from your hub (assuming th