Ariston FI7 871 SC IX A AUS Manual de referencia - Página 5
Navegue en línea o descargue pdf Manual de referencia para Horno Ariston FI7 871 SC IX A AUS. Ariston FI7 871 SC IX A AUS 13 páginas.
Imprimir página
USING THE APPLIANCE FOR THE FIRST TIME
1.
PLEASE SELECT LANGUAGE
You will need to set the language and the time
when you switch on the appliance for the first time:
"ENGLISH" will scroll along the display.
Use
or
to scroll through the list of available
languages and select the one you require.
Press
to confirm your selection.
Please note: The language can subsequently be changed
from the "Settings" menu.
2.
SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
Use
or
to set the hour you require and press
: The two digits for the minutes will flash on the
display.
Use
or
to set the minutes and press
confirm.
Please note: You may need to set the time again following
lengthy power outages.
3.
SET THE POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW: If your
household uses a lower power, you will need to
decrease this value.
Press the
display, then press
Press
or
press
to confirm.
Use
or
confirm.
LOW
4.
HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
to
Heat the oven to 200 °C for around one hour, ideally
using a function with air circulation (e.g. "Forced Air"
or "Convection Bake").
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
button until you see "SETTING" on the
to confirm.
to select the "POWER" menu item and
to select "LOW" and press
EN
to
5