Ariston OK 892EL P AUS S Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Horno Ariston OK 892EL P AUS S. Ariston OK 892EL P AUS S 16 páginas.

Imprimir página

Automatic cleaning with the FAST CLEAN

function

With the FAST CLEAN mode, the internal temperature of the

oven reaches 500°C. The pyrolytic cycle is activated, burning

away food and grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic

cleaning cycle as surfaces may become very hot. Particles

may ignite inside the oven as a result of the combustion

process. There is no cause for concern: this process is both

normal and hazard-free.

Before initiating the FAST CLEAN mode:

• clean the oven door;

• remove large or coarse food residues from the inside of

the oven using a damp sponge. Do not use detergents;

• remove all accessories and the sliding rack kit (where

present);

• do not place tea towels or pot holders over the oven

handle.

! If the oven is too hot, the pyrolytic cycle may not start.

Wait for the oven to cool down.

! The programme may only be started once the oven door

has been closed.

! The desired Fast Clean mode will be confirmed and started

automatically if the CLOCK icon button is not pressed within

10 seconds from selecting the cooking time

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the

2. Press the

icon; the display will show the text "Piro",

"nor" and the default duration of 1:30 h (normal cycle)

alternately.

3. Press the

icon, then turn the TIMER knob to adjust

the default cleaning level. There are 3 different levels to

choose from, each with a pre-set duration which cannot

be modified:

1. Economy (ECO): turn the knob towards " ". Duration

1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards " ". Duration 2

hours.

icon to confirm.

4. Press the

5. Press the

icon to begin the cleaning cycle.

An end time for the FAST CLEAN cycle (as for a normal

cooking cycle) may be programmed (see Programming the

automatic cleaning end time).

Safety devices

• the door locks automatically as soon as the temperature

reaches a high value; the

display;

• pressing the

• if a malfunction occurs, the heating elements will be

• once the oven door has been locked, you cannot change

Programming the automatic cleaning end time

1. Press the

digits on the display will begin to flash.

2. Turn the TIMER knob towards " " and " " to adjust the

cleaning end time value.

3. Once you have reached the desired end time, press

the

cleaning end time and the set cleaning level alternately.

4. Press the

Programming has been set when the

are illuminated.

5. Once cleaning has finished, "END" appears on the display

and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

To cancel programming press the

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait

icon.

for the

temperature has dropped to an acceptable level. You will

notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge

once the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in which

case it is not necessary to remove the deposits, they are

completely harmless and will not affect your food in any way.

icon lights up on the

icon cancels the cleaning cycle at any

time;

switched off;

the duration and end time settings.

icon twice: the

icon again. The display will show the duration, the

icon to activate the programmed mode.

FAST CLEAN level has been selected, with the default

duration of 1 hour. 12:30 is scheduled as the end time.

The programme will start automatically at 11:30 a.m.

icon to switch off: this indicates the oven

AUS

icon and the numerical

and

icons

icon.