Ariston NIV 320B Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Placa Ariston NIV 320B. Ariston NIV 320B 17 páginas.
También para Ariston NIV 320B: Manual de instrucciones (20 páginas)
Imprimir página
INSTALLATION
After unpacking the product, check for any damage during transport. In the event of
problems, contact the dealer or the After-Sales Service.
- The electrical connection of this hob must be carried out by qualified
technician, according to the instructions in this user manual and in
compliance with the local regulations. In the event of any damage that
occurs as a result of improper connection or installation, the warranty will
not be valid.
- This appliance must be earthed.
Installation Notes
-
Cookerhood needs to be installed at least 65cm above the hob.
-
Extractor fans must be fitted in accordance with the manufacturer's instructions.
-
The wall in contact with the rear of the hob must be made of flameproof material.
Fitting the hob into a work surface
-
The hob can be inserted into any worktop provided it is heat resistant up to at least 90°C.
-
Induction hob may be built in 25 to 40mm thick worktops.
-
Create an opening with the dimension shown in the pictures below.
Installation
1.
Apply the one-sided self-adhesive sealing tape supplied all the way round the lower glass
edge of the cooking surface along the outer edge of the ceramic glass panel. Do not stretch
it.
2.
Screw the 4 worktop mounting brackets on the side walls of product as picture shown
below.
6