Whirlpool 2440 Manual de piezas y mantenimiento - Página 7
Navegue en línea o descargue pdf Manual de piezas y mantenimiento para Lavadora Whirlpool 2440. Whirlpool 2440 20 páginas. Twin tub washing machine white magic super - thailand- cool grey
Imprimir página? Before installing the machine make sure of the following facilities
?
Electrical requirements
A 220 Volts, 5 Amps and 50 Hz, three pin socket with proper earth and fuse is
required.
DO NOT USE EXTENSION CORD WITH THE WASHING MACHINE. SUCH
USE MAY RESULT IN FILE, ELECTRICAL SHOCK OR OTHER PERSONAL
INJURY DUE TO IMPROPER OR INADEQUATE GROUNDING.
?
Water source
A water tap suitable to the faucet coupler supplier with the machine is required
(Max. tap diameter 3/4").
?
Drain facility
A drain at floor level to drain the used water form the machine by gravity is
required.
?
Sturdy floor
The floor must be level and sturdy enough to support the machine weight.
? Installation Procedure
?
Check the plug point to which the machine is to be connected for proper
earthing using a multimeter in voltage mode. The meter should read 220 Volts
between line and earth and line and neutral. Also the meter should read zero
volts between earth and neutral. If earthing is not proper advise the customer
to get the same corrected by an electrician before installing the washing
machine
?
Cut the straps wound over the machine carton using stripper or a knife.
?
Take out the corrugated packing material placed over the machine.
?
Pull out the corner posts placed at the corner of the carton one by one.
This document is only intended for qualified technicians who are aware of the respective safety regulations.
nd
First release Date 2
May, 2001
Document No. WOI/WM/2001/001
INSTALLATION PROCEDURE
Subject to modification
PAGE 6 of 21
Whirlpool of India
Revision No1
Reviced on 13/01/2003