Whirlpool 8212638RP Manual del propietario Manual - Página 7

Navegue en línea o descargue pdf Manual del propietario Manual para Lavadora Whirlpool 8212638RP. Whirlpool 8212638RP 29 páginas.

2. Place a broad, flat container beneath the drain pump filter to

collect the drain water. Release the black hose from the hose

clip, remove the plug, and drain the hose into the container.

Empty the container. Repeat this procedure if necessary until

all the water has drained. Make sure that the black hose is

completely dry, replace the plug, and secure the hose in the

clip.

NOTE: If water does not drain well, push in hose slightly to

remove any possible kinks.

Hose clip

3. Lay a cotton cloth beneath the drain pump filter to absorb any

water still in it. Then remove the drain pump filter by turning it

counterclockwise.

4. Check the drain pump filter once a month. Remove large

clumps of lint by hand from the filter and place lint in a suitable

waste container. Remove remaining residue from the filter by

rinsing with water.

Black hose

5. Reinsert the drain pump filter by turning it clockwise. Make

sure to turn it in as far as it will go, with the filter handle

remaining as close as possible to the vertical position.

6. Replace and close the dispenser drawer. Make sure to insert

both rails simultaneously when replacing the drawer. You will

hear a clicking sound that indicates the rails have engaged. To

ensure proper placement of the drawer, pull out fully. The

drawer should be fully engaged and the rails locked in placed.

Make sure the drain hose is secured in the hose clip and

tucked underneath the cutout.

Additional Cleaning

Gently pull back the rubber door seal and clean any stained areas,

soil buildup, or lint with the textured side of an affresh

Cleaning Wipe.

Machine