3Com 3C35420 Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Hardware de red 3Com 3C35420. 3Com 3C35420 8 páginas.

Imprimir página
R
Module Description
FDDI Module
Installation Guide
For the CoreBuilder
Your system connects to FDDI networks using one of these modules:
FDDI MMF (Part Number: 3C35410) — Connects to multimode
fiber-optic cable, providing a transmission distance of up to 2 km
(1.2 mi) using 62.5 micron fiber.
FDDI SMF (Part Number: 3C35420) — Connects to single-mode
fiber-optic cable, providing a transmission distance of approximately
14.4 km (8.9 mi) using 9 micron fiber.
Each FDDI module contains six FDDI ports that use fiber (SC) connectors.
Each port provides a 100 Mbps FDDI connection over fiber-optic cable.
The ports support both SAS (single-attached station) and DAS
(dual-attached station) modes, for a maximum of six SAS connections or
three DAS connections. You can remove and replace the modules with
the system on.
CAUTION: The FDDI module requires release 2.0.0 or higher of the
CoreBuilder 3500 system software. Download this software from the
following 3Com Web site:
http://support.3Com.com/index.htm
Figure 1 shows the FDDI MMF module. The FDDI SMF module is similar.
Figure 1 FDDI MMF Module
FDDI MMF
A1
L
3C35410
E
T
PWR
B4
L
INS
E
ERR
T
3500 System
™
A2
A3
L
L
E
E
T
T
B5
B6
L
L
E
E
T
T