Whirlpool EL88TRRWS Manual de instrucciones de instalación - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Frigorífico Whirlpool EL88TRRWS. Whirlpool EL88TRRWS 20 páginas. Trim kit
También para Whirlpool EL88TRRWS: Manual de dimensiones (1 páginas), Manual de uso y mantenimiento (24 páginas), Manual de uso y mantenimiento del frigorífico (28 páginas), Manual de energía (2 páginas)

5. Push the refrigerator and freezer fully into the opening.

Install the Base Grille

Install the Bracket onto the Cabinets

1. Remove the plastic base grille from each appliance.

2. The four

" hex head screws contained in the kit,

will be used to fasten the bracket.

3. Insert one screw through the lower bracket and thread it into

the cabinet.

NOTE: Do not completely tighten the screw.

4. Align the bracket holes with the holes in the appliances and

install the remaining three screws.

NOTE: Do not completely tighten the screws.

5. Make sure the appliances are still level. Completely tighten all

four bracket screws.

Install the Bottom Grille Assembly

1. Align the four clips on the bottom grille assembly with the

square holes in the base of the cabinets.

2. Push and snap all the grille clips in place.

NOTE: Make sure the grille clips are fully engaged and that

the base grille's side caps are situated outside the hinge

bracket on each appliance.

Install the Gap Filler Assembly

1. Place the magnetic gap ller assembly between the

refrigerator and freezer to ll in the gap between the

appliances.

NOTE: The gap ller should be ush with the tops of the

appliance cabinets.

Clean the trim and grille surfaces with a cotton cloth dampened

with a solution of mild dish detergent and warm water. Do not use

harsh or abrasive cleaners because they will damage the metal

surface of the grille and trim.