Ariston ASL75CXSNA Manual de reparación - Página 15
Navegue en línea o descargue pdf Manual de reparación para Secadora Ariston ASL75CXSNA. Ariston ASL75CXSNA 18 páginas. Condensation dryer
También para Ariston ASL75CXSNA: Ficha de datos (1 páginas)
Imprimir página
13. DRUM BELT & BEARING BLOCK
•
With the Bearing Block Cover removed, remove the two Phillips screws that attach the Drum Grounding Strip (Fig. 13-3). Then
using a Needle Nose Pliers remove the Drive Pin (Fig. 13-4).
TECH NOTE: Be careful not to damage the Drive Pin, since you will need to reuse it.
BEARING BLOCK: At this point the Bearing Block can be replaced if required.
• Then remove the Drum Belt from the Motor and Pulley Wheel (see Section 12, pages 10 & 11).
•
Next, remove the Right Side Strut (Fig.13-5). Then separate the Rear Panel from the Drum and slide the Drum Belt off the Drum.
REPAIR MANUAL
Fig. 13-1
Fig. 13-3
• To remove Drum Belt (Fig. 13-1), first
remove the Top Panel (see Section 3,
page 3) and the Right Side Panel (see
Section 10, page 8).
• Then remove the two Phillips screws
that attach the Bearing Block Cover to
the Rear Panel (Fig. 13-2).
Fig. 13-2
Fig. 13-4
ASL75CXS NA
Fig. 13-5
Page: 12