Acom JW-1 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Scales Acom JW-1. Acom JW-1 16 páginas. Top loading balance
También para Acom JW-1: Manual del usuario (3 páginas)

Imprimir página

Enable & Disable Weighing Units

Use the following procedure to enable or disable individual weighing

units.

Make sure that the scale is plugged into a proper outlet, the

platter is properly seated, there is nothing on the platter, and

that the Power Switch is OFF.

Press and hold down the

Switch is ON.

The display will read: up-.

Press the MODE key and then the

read: st-mod.

If you want to Enable g weighing press SET; to Disable g

press the MODE key.

If you want to Enable Pcs weighing press SET; to Disable Pcs

press the MODE key.

If you want to Enable % weighing press SET; to Disable %

press the MODE key.

If you want to Enable c.t. weighing press SET; to Disable c.t.

press the MODE key.

If you want to Enable oz weighing press SET; to Disable oz

press the MODE key.

10. If you want to Enable lb weighing press SET; to Disable lb

press the MODE key.

11. If you want to Enable dwt weighing press SET; to Disable dwt

press the MODE key.

12. If you want to Enable Gn weighing press SET; to Disable Gn

press the MODE key.

13. If you want to Enable kg weighing press SET; to Disable kg

press the MODE key.

14. If you want to Enable toz weighing press SET; to Disable toz

press the MODE key.

15. If you want to Enable t weighing press SET; to Disable t press

the MODE key.

16. Now press the MODE key 5 times and the balance will run the

display test and go to Zero.

17. Press the MODE key once then turn the Power Switch is OFF

and then back ON.

18. You are done!

For more information go to:

http://www.acomamerica.com/techs.htm#JW-1 Techs

key while you turn the Power

key. The display will