Clam 16611 Manual - Página 6

Navegue en línea o descargue pdf Manual para Equipos de pesca Clam 16611. Clam 16611 17 páginas.

1. LAY TWO OF THE HOOP POLES TOGETHER ON FLOOR AND ASSEMBLE WITH

FASTENERS AS SHOWN

LIGHT STICK WIRE MUST BE PLACED ON SAME SIDE AS BATTERY HOLDER. THIS

VIEW WILL HAVE THE WIRE TO YOUR RIGHT SIDE WHEN SITTING IN TRAP.

2. SCREW IN THE PROPER SCREWS INTO PLATE DO NOT OVERTIGHTEN.

3. WHILE HOLDING THE SCREW IN PLACE START TO THREAD THE NYLOCK NUT ONTO

THE SCREW AND TIGHTEN BY HAND UNTIL RESISTANCE IS FELT. THEN USING 7/16 SOCKET

OR WRENCH CONTINUE TO TIGHTEN NUT UNTIL IT IS EVEN WITH END OF SCREW. DO NOT

OVERTIGHTEN.

STEP-5

PLACE HOOP WITH

LIGHT STICK ON TOP.

SLIDE CLIP ONTO POLE AND SNAP INTO THE TWO HOLES

LOCATED ON THE HOOP BEFORE ADDING FASTENERS.

INTO

POLES SHOULD MOVE

EASILY, DO NOT OVERTIGHTEN

DO NOT USE NUT

WITH THIS SCREW.