AEQ Phoenix Mobile Nota de aplicación - Página 5

Navegue en línea o descargue pdf Nota de aplicación para Equipos de grabación AEQ Phoenix Mobile. AEQ Phoenix Mobile 8 páginas. Audio codec system
También para AEQ Phoenix Mobile: Nota de aplicación (8 páginas)

Imprimir página

7 Expires: 60

Press "Back" to go to "3. SIP Config" then select "4. Call Settings" and check

that "Media Port" is 5004.

3. REGISTERING AT THE AEQ SIP SERVER

If everything is correctly configured, after these steps the unit should have registered at

the AEQ SIP server and the top line of every screen should display the current time.

In case it is not registered, if the equipment power is cycled, the sequence of legends

ad the top line should be:

If this happens, just double-check that the configuration is correct and, if necessary,

ask one of our technical assistance services for support.

If the unit registers correctly, the sequence will be:

4. SENDING A TEST CALL TO PHOENIX MASTER

We are going to go through the correct configuration of the system and prepare it to

make a test call to a unit called [email protected] that AEQ maintains for

our customers and that continuously transmits audio.

Check that a set of headphones are connected to the front HP1 connection.

Check that AEQMaster_IP entry is listed in the Call Book and launch the call. In order

to do so:

From main screen: press Menu. Observe the "Select contact" line.

If it is AEQMaster_IP, everything is ready and the call is sent only by pressing the

green key.

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:

Initializing

Finding Nat Type

Initializing

Finding Nat Type

APLICACIONES ELECTRONICAS QUASAR S.A.