Clam RUNNER KIT Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios para automóviles Clam RUNNER KIT. Clam RUNNER KIT 2 páginas. For: x200 / x400
También para Clam RUNNER KIT: Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas)
Imprimir página
QTY.
PART NO.
6
104926
1
104966
1
101550
30
102516
30
101548
30
101549
1. Position the strips on the base. Using a 3/16" or slightly larger drill bit, drill a hole through the base
using existing holes in the runner strip starting at the curved end of the base.
2. Slightly tighten fasteners to hold the strip in place so that you may then bend the runner around the
curved area before drilling the next hole
(If you have trouble bending the Wear Strip to the contour of the base, use a heat gun or hair dryer to
make the Strips more pliable before drilling.)
( Also, apply a small amount of grease to threads of screw to prevent seizing of threads.)
3. Drill next hole through the base and slightly tighten fastener to hold the runner in place.
4. Keep repeating this procedure for remaining holes and securely tighten all fasteners when they
are all installed.
5 . Repeat same process for remaining runners.
START HERE
PARTS LIST
DESCRIPTION
RUNNER, .50 X 1.50 X 58 LG
INSTRUCTION, RUNNER KIT, X200/X400
KIT, HARDWARE RUNNER
SCREW,10-24 X 1" PTHMSSS
NUT, 10-24 NYLOCK SS
WASHER, #10 FENDER SS
Runner Kit Installation
(includes the following)