Whirlpool WED97HEXL Manual de uso y mantenimiento - Página 10
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Secadora Whirlpool WED97HEXL. Whirlpool WED97HEXL 36 páginas. Electronic dryer
También para Whirlpool WED97HEXL: Manual del usuario (24 páginas), Manual de instrucciones (8 páginas)
Imprimir página
4.
Select the desired cycle
CASUAL
DELICATE
Eco Auto
Cycles
TIMED
DRY
QUICK
DRY
Manual Cycles
SPECIALTY
CYCLES
MY CYCLE
Select the desired cycle for your load. See the "Cycle Guide"
or the display for more information about each cycle.
If selecting Timed Dry, use LCD control buttons to adjust the
length of the cycle.
5.
Set any cycle settings
The default cycle settings will be displayed on the LCD screen.
You may adjust different settings, depending on whether you
have selected an Auto Cycle, Manual Cycle, or Steam Cycle.
See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Auto Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without canceling the cycle.
Automatic cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Manual Cycles:
When you select a Manual Cycle, the default time is displayed.
Use the LCD control buttons to increase or decrease the time
in 1 minute increments. Press and hold to change the time in 5
minute increments.
The default temperature may be changed by pressing the
Temperature button until the desired dry temperature is
selected.
Quick Refresh with Steam:
Select the number of garments in the load. The dryer will
automatically set the drying time and temperature.
10
NORMAL
BULKY ITEMS
JEANS
HEAVY
DUTY
TOWELS
ENHANCED
TOUCH UP
QUICK REFRESH
Steam Cycles
Select number of Garments
Changing the Auto Cycle settings to
increase or decrease drying time
If all your loads on all Auto Cycles are consistently not as
dry or too dry, you may change the default settings to
increase or decrease the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is saved in memory and will affect
all of your Automatic cycles, not just the current cycle/load.
There are 5 drying settings:
Factory preset dryness level.
Slightly drier clothes, 15% more drying time.
Much drier clothes, 30% more drying time.
Slightly wetter clothes, 15% less drying time.
Much wetter clothes, 30% less drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in programming
mode (the power button is on, but machine not running)
to adjust the default settings.
1. Before starting an Auto cycle, press and hold the
LCD control button for Dryness Level for 6 seconds.
The LCD will briefly display the regular Dryness
Level options, then change to show the default
setting options.
2. Press the LCD control button for the desired setting.
3. Press the BACK button multiple times to return to the
main screen for the selected cycle.
6.
Select any additional options
Add additional options such as Static Reduce and/or
EcoBoost by pressing the button for that option.
NOTE: Not all options and settings are available with all cycles.