Whirlpool 27' Manual de instrucciones de instalación - Página 15

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Secadora Whirlpool 27'. Whirlpool 27' 48 páginas. Microwave oven and thermal oven
También para Whirlpool 27': Ayuda al empleo (36 páginas), Manual de instrucciones de instalación (11 páginas), Manual de instrucciones de instalación (11 páginas), Manual de instrucciones de instalación (22 páginas), Manual de instrucciones de instalación (27 páginas), Manual de instrucciones de instalación (32 páginas), Manual de instrucciones de instalación (12 páginas), Instrucciones de instalación (5 páginas)

Attach long hose to "Y"

connector and tighten couplings

Attach dryer 5 ft (1.5 m) inlet hose ends to the "Y" connector.

Attach washer cold inlet hose to other side of "Y" connector.

Screw on coupling by hand until it is seated on connector.

Using pliers, tighten the couplings an additional two-thirds

turn.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach long hose to dryer fill

valve and tighten coupling

Attach other end of long hose to

fill valve at top of dryer back panel.

Screw on coupling by hand until

it is seated on fill valve connector.

Using pliers, tighten the coupling

an additional two-thirds turn.

NOTE: Do not overtighten. Damage

to the coupling can result.

Turn on cold water faucet

Check that the water faucet is turned on.

(768 mm)

(101 mm)

Check for leaks

Check for leaks around "Y" connector, faucet, and hoses.

Connect Vent

Connect vent to exhaust outlet

Using a 4" (102 mm) clamp, connect vent to exhaust outlet

in dryer. If connecting to existing vent, make sure vent is

clean. Dryer vent must fit over dryer exhaust outlet and inside

exhaust hood. Check that vent is secured to exhaust hood

with a 4" (102 mm) clamp.

Move dryer to final location

Move dryer to final location. Avoid crushing or kinking vent.