Whirlpool 29" Wide Models Manual de instrucciones de instalación - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Secadora Whirlpool 29" Wide Models. Whirlpool 29" Wide Models 20 páginas. Dryer
También para Whirlpool 29" Wide Models: Manual de instrucciones de instalación (48 páginas), Manual de instrucciones de instalación (22 páginas)

Electrical Connection

Power Supply Cord

Electrical Connection Options

Choose electrical connection type

Power supply cord 4-wire receptacle

(NEMA Type 14-30R): Go to steps 1-2 on

page 9 for power supply cord strain relief:

then steps 3-6 for 4-wire Power Supply

Cord Connection section. Then, go to

Venting Requirements.

Power supply cord 3-wire receptacle

(NEMA Type 10-30R): Go to steps 1-2 on

page 9 for power supply cord strain relief:

then steps 3-5 for 3-wire Power Supply

Cord Connection section.

Then go to Venting Requirements.

4-wire direct connection: Go to steps

1-2 on page 10 for direct wire strain relief:

then steps 3-8 for 4-wire Direct Wire

Connection section. Then go to Venting

Requirements.

3-wire direct connection: Go to steps

1-2 on page 11 for direct wire strain relief:

then steps 3-7 for 3-wire Direct Wire

Connection section. Then go to Venting

Requirements.

NOTE:

If local codes do not permit connection of a

cabinet-ground conductor to neutral wire, go to "Optional

3-wire Connection" section. This connection may be

used with either a power supply cord or a direct wire

connection.

Direct Wire

Remove terminal block cover

Before you start, disconnect power. Remove hold-down

screw (D) and terminal block cover (A).

A. Terminal block cover

B. External ground conductor screw

C. Center terminal block screw

D. Hold-down screw

E. Neutral ground wire

F. Hole below terminal block cover

C C