Whirlpool 3LWED4915 Manual de uso y mantenimiento - Página 6

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Secadora Whirlpool 3LWED4915. Whirlpool 3LWED4915 14 páginas. Electric or gas dryer

Whirlpool 3LWED4915 Manual de uso y mantenimiento
Control Panel & Features
1
WRINKLE SHIELD
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The Wrinkle
Shield
feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
Get 40 minutes of heat-free, periodic tumbling at the end
n
of a cycle. Turn the Wrinkle Shield
any time before the cycle has ended.
DRYER CYCLE KNOB
2
Use your Dryer Cycle Knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting.
6
1
2
Not all features and options are available on all models.
FEATURE (on some models)
knob to on or off at
2
Appearance may vary.
TEMPERATURE
3
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
STOP/START
4
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
Turn the Stop/Start knob to select the desired setting
(On or Off). Press the Stop/Start knob to start the dryer.
NOTE: When the Wrinkle Shield
the tone will sound every 5 minutes until the clothes
are removed or the Wrinkle Shield
3
4
4
3
setting is selected,
setting ends.