Whirlpool 4KNED4600 Manual de uso y mantenimiento - Página 8

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Secadora Whirlpool 4KNED4600. Whirlpool 4KNED4600 36 páginas.

Imprimir página
3.
SeJect the desired cycle
AUTOMATIC
DRY
wrinkle
prevent
0
OFF 70
60
50
20
TIMED DRY
40
3O
touch
up
less dry
normal
more
dry
10
OFF 0
30
OFF
10
0
AIR DRY
Appearance
May Vary.
Select the desired cycle for your load. See the Cycle Guide
for more information
about each cycle.
AUTOMATIC
DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting More Dry or Less Dry automatically
adjusts the
dryness level at which the dryer will shut off. Once a dry level
is set, it cannot be changed without stopping the cycle.
AUTOMATIC DRY cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: More Dry removes more load moisture. Less Dry
removes less moisture and used for loads you may want to
put on a hanger to complete drying.
4. Set cycle settings
and options
(on some models)
"_-_ T EMPERATURE
@ WRINKLE PREVENT
low
high
delicates
cotton
medium
casuaJ
0
off
Appearance
May Vary.
Select cycle settings and options by turning the knob to the
desired position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE
(on some models)
Turn the TEMPERATURE knob to change the drying
temperature setting. See "Setting the Drying Temperature".
Wrinkle Prevent option (on some models)
[] To get periodic, heat-free tumbling at the end of a cycle,
turn the WRINKLE PREVENT knob to ON or OFF at any
time before the cycle has ended.
NOTE: This option is available only on Automatic
Cycles.
5. Optional: Select End of Cycle
Signal (on some models)
I> PUSH TO START
end of cycle
signal
O
I
off
Appearance
May Vary.
Turn the PUSH TO START/End of Cycle Signal knob to
select the desired setting (On or Off). The End of Cycle Signal
produces an audible sound when the drying cycle is finished.
Promptly removing clothes at the end of the cycle reduces
wrinkling.
NOTE: When the Wrinkle Prevent option is selected and
the End of Cycle Signal is on, the tone will sound every
5 minutes until the clothes are removed, or the Wrinkle
Prevent option ends.
6. Press PUSH to START to
begin cycle
I> PUSH TO START
end of cycle
signal
0
I
Appearance
May Vary.
Push and hold the PUSH TO START/End of Cycle Signal knob
to begin the cycle.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Prevent option to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.
8