Whirlpool WGD70HEBW Manual de instalación - Página 13
Navegue en línea o descargue pdf Manual de instalación para Secadora Whirlpool WGD70HEBW. Whirlpool WGD70HEBW 44 páginas. Whirlpool duet 7.4 cu. ft. front load electric dryer with eco monitor
También para Whirlpool WGD70HEBW: Manual de instrucciones (8 páginas), Manual de uso y mantenimiento (40 páginas), Manual de instrucciones de instalación (44 páginas)
Imprimir página
3.
Tighten couplings
Using pliers, tighten the couplings with additional two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can result.
4.
Attach long hose to "Y"
connector and tighten couplings
Attach one of the 5 ft (1.5 m) inlet hose ends to the "Y"
connector. Attach washer cold inlet hose to other side of
"Y" connector. Screw on coupling by hand until it is seated
on connector. Using pliers, tighten the couplings an additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can result.
5.
Attach long hose to dryer fill valve
and tighten coupling
Remove protective cap from
water inlet valve. Attach other end
of long hose to fill valve at bottom of dryer
back panel. Screw on coupling by hand until it is seated on
fill valve connector. Using pliers, tighten the couplings an
additional two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling
can result.
6.
Turn on cold water faucet
Check that the water faucets are turned on.
7.
Check for leaks
Check for leaks around "Y" connector, faucet, and hoses.
13