Whirlpool WGD9450WW - 27" Gas Dryer Especificaciones - Página 7

Navegue en línea o descargue pdf Especificaciones para Secadora Whirlpool WGD9450WW - 27" Gas Dryer. Whirlpool WGD9450WW - 27" Gas Dryer 8 páginas. Steam and non-steam electronic gas dryer
También para Whirlpool WGD9450WW - 27" Gas Dryer: Manual de instrucciones de instalación (32 páginas), Manual de uso y mantenimiento (28 páginas), Dimensiones (1 páginas)

Imprimir página

DRYER INSPECTION AND CLEANING

Frequency of Exhaust System Cleaning

Every exhaust system must be inspected periodically and cleaned

to ensure that it is intact and free from lint accumulation. The

frequency of these inspections will vary, depending on the system

and usage of the dryer. For single-family usage, an annual

inspection is recommended. In commercial usage or in multiple

dryer systems a more frequent inspection is recommended.

Complaints of long drying times or a hot dryer top indicate the

need for inspection of the exhaust system.

Inspecting the Exhaust System

1. Disconnect the exhaust duct from the dryer and from the

exhaust hood (at the exhaust outlet).

2. Inspect the interior of the duct and remove any lint

accumulation.

■

Be sure that lint is removed from the exhaust hood. Lint

may collect in the exhaust hood so that the flappers or

louvers (if installed as part of the exhaust system) will not

open or close completely.

■

After cleaning the exhaust hood, check that the flapper or

louvers move freely.

3. Reassemble the exhaust duct and hood, checking that the

joints are secure.

4. Operate the dryer and verify that the exhaust air is not

obstructed in the vent and that there are no leaks in the

system.

■

Seal any leaks that are found.