Whirlpool WGD97HEXR0 Manual de instrucciones de instalación - Página 13
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Secadora Whirlpool WGD97HEXR0. Whirlpool WGD97HEXR0 38 páginas. Gas dryer
Imprimir página
and tighten
coupling
Using pliers, tighten the couplings with additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling
can result.
f
4,
Attach
long hose to "Y"
connector
and tighten
couplings
Attach other end of long hose
to fill valve at bottom of dryer
back panel. Screw on coupling
by hand until it is seated on fill valve connector. Using pliers,
tighten the couplings an additional two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling
can result.
One end of the long hose has a wire mesh strainer inside the
coupling. Attach this end to the "Y" connector. Attach washer
cold inlet hose to other side of "Y" connector. Screw on
coupling by hand until it is seated on connector. Using pliers,
tighten the couplings an additional two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can result.
Check that the water faucets are turned on.
fT,
Check for leaks
J
Check for leaks around
"Y" connector,
faucet,
and hoses.
13