Calandra Racing Concepts WTF1 Manual de montaje - Página 6
Navegue en línea o descargue pdf Manual de montaje para Juguete Calandra Racing Concepts WTF1. Calandra Racing Concepts WTF1 11 páginas. Calandra racing concepts 1/10th formula 1 car
Imprimir páginaDamper Tubes
continued...
Bag 5
** Adding the Damper Tubes to the Chassis assembly **
Snap the assembled & lubed damper tubes on the
respective points as shown in the diagram to the right. You
will find it easier to snap on the smaller 2-56 ball studs first,
then pop the lower, larger 4-40 ballcups on.
Top Deck
Bag 6
Top Deck Orientation - If you were to draw a line
straight across the top deck between the two
mounting holes, then there would be three of the
five countersunk screw holes on one side of the
line, and two on the other. The three holes
should go toward the front of the car.
1854 - Top Deck -
1424 - 4-40 x 1/4"
Gen-X10 SE
1537 - Hex Standoff -
WTF-1 Top Deck
1854
1537
1434 - 4-40 x 1/4"
Flat Head
Button Head
The 3378 1" Body Post pictured in this assembly is used as an
antenna mounting post. Most all antenna wires will actually
thread through the holes for the body clips and then stay there
1407
on its own. If not, you can also wrap the wire around the outside
of the post similarly to how you would with a rollover antenna on
a 12th scale car. Then hold the wrapped wire in place with any
number of things such as a rubber band, zip-tie, an o-ring, heat
shrink tubing, etc.
3378
1407 - Anodized Hex Balls (4)
3378 - Body Posts
w/ collars (1 in.)
3373 - Plastic Battery Position Pieces
3373
5