Whirlpool HC768 Manual de uso, mantenimiento e instalación - Página 6
Navegue en línea o descargue pdf Manual de uso, mantenimiento e instalación para Campana de ventilación Whirlpool HC768. Whirlpool HC768 40 páginas.
Imprimir página
•
Packing materials (plastic bags, polystyrene, etc.) must be kept out of children's
reach, as they are potentially dangerous.
•
Installation must be carried out by a qualified technician.
•
Check the voltage on the rating plate which should correspond to the voltage
in your home.
•
Connect the power and switch on the motors and lighting system to check the
operation.
•
Check the following accessories before installation:
a. Exhaust duct adapter ( 6" to 6" x 1 pc, 6" to 5" x 1 pc)
b. Detachable oil cup 1 pc (HC338 / HC768 / HC638 / HE568 / HE438 / HC646)
Detachable oil cup 2 pcs (HE2421), oil dish 2 pcs
c. Light bulb 1 pc ,water jug x 1 pc (water jug only for HC338 / HC768 / HC638
/ HC646)
d. Warranty card 1 pc and Instruction manual 1 pc
e. Hardware package x 1 set
(6#*1½" wooden screw x 6 pcs + washer x 6 pcs + 3/16"*1/4" screw x 4
pcs + round rubber stand x 2 pcs)
1. Location:
• Air turbulence from window/door may reduce the
effectiveness of hood. Suggest to close window/
door before using hood.
• The smoke has to rise up to 25 cm to be within the
range of suction efficiency.
2. Position:
• The installation height is measured vertically from
center of fan grille of hood to the top of the stove.
• The minimum installation height should not be less than
650 mm and the recommended height is 700±50 mm.
• Avoid left-right or front-dropped inclination.
3. Exhaust duct:
• 6-inch diameter exhaust duct is recommended to use
in order to maximize suction efficiency.In case of 5-inch
exhaust duct, an adapter as enclosed in the packaging
can be used.
• Before installing the hood,please apply fast drying glue to
the collar and securely attach it to the top of the cooker
hood's vent lid. Install the cooker hood and exhaust duct
to the plastic collar and seal with fast drying glue.
B
U
EFORE
SING
I
NSTALLATION
T
H
HE
OOD
2
Exhaust duct