Backyard Pro Butcher Series Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Mezclador Backyard Pro Butcher Series. Backyard Pro Butcher Series 7 páginas. Meat tenderizer motor
También para Backyard Pro Butcher Series: Manual de instrucciones (11 páginas), Manual de instrucciones (5 páginas), Manual de instrucciones (5 páginas), Manual de instrucciones (11 páginas), Manual de instrucciones (6 páginas), Manual de instrucciones (6 páginas), Manual de instrucciones (5 páginas), Manual de instrucciones (4 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (4 páginas)

ASSEMBLY INSTRUCTIONS

1. Connect the Left and Right Legs to the Base

using the provided Allen Wrench and Screws.

(Figure 1)

2. Using the Allen Wrench and Screws, attach

the Left and Right Legs to the Bottom

Housing.

3. Install the Chute to the Top Housing using the

Allen Wrench and Screws.

4. Insert the Blade Rack Assembly into the

Bottom Housing, guiding the Drive Shaft into

the bearing journals. Make sure the teeth

of the Blade Racks are properly meshed

together.

5. Position the Top Housing onto the Bottom

Housing and line up the screw holes.

6. Secure the Top Housing to the Bottom

Housing using the Housing Thumbscrews. DO

NOT OVERTIGHTEN!

7. Insert the Left Comb and Right Comb into the

Top Housing. (Figure 2) NOTE: The Left Comb

is marked with an "L" on the upper portion

of the Comb. The Top Housing is marked with

an "L Comb" and "R Comb" to aid in Comb

installation.

8. Install Handle onto the Blade Rack Shaft.

Secure the Handle to Blade Rack Shaft with

the Handle Thumbscrew. (Figure 1)

WARNING

PROTECTIVE/CUT-RESISTANT

GLOVES ARE RECOMMENDED

WHENEVER HANDLING THE

BLADE ASSEMBLY!