Firestone 2554 Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Sistemas de control Firestone 2554. Firestone 2554 4 páginas. Light duty remote air command

Imprimir página

Light Duty Remote Air Command

INSTALLATION INSTRUCTIONS

Congratulations on your purchase of an Air Command

kit. This kit was designed to provide inflation control of

your air helper springs. This kit will be an asset to your

vehicle, meeting nearly all of your air supply needs.

Please take a few minutes to read through the

instructions to identify the components and learn how

to properly install your Air Command kit.

NOTE:

The Air Command kit can be used with all air helper

spring products. If you are installing an air suspen-

sion system, do not install the air line tubing to the air

springs as stated in the suspension system instruc-

tion manual. If you are adding the Air Command kit

to an existing air suspension system, you will need to

deflate the air springs and remove the air line tubing.

PARTS LIST

WIRELESS PAIRED SYSTEM

WIRELESS CONTROLLER

WIRELESS ECU

AIR COMPRESSOR

VALVE BLOCK

PRESSURE SENSOR

AIR LINE (18 FT)

21-8427

NOTE ON CONNECTING THE AIR LINE TUBING

Cut the air line tubing as squarely as possible. To con-

nect the air line tubing to the fittings, push the tubing

into the fittings as far as possible. If for any reason the

tubing must be removed, first release the air pressure

from the air helper spring. Push the collar towards

the body of the fitting and then pull out the tubing. To

reassemble, make sure the tubing is cut squarely and

push the tubing back into the fitting.

HARDWARE PACK (A21-760-2554)

9456

MALE FITTING

9366

1/4" FLAT WASHER

9455

3/16" FLAT WASHER

9377

1/4"-20 X 2-1/2" HEX BOLTS

9357

10-32 X 3/4" MACHINE SCREW

9054

10-32 X 1" MACHINE SCREW

10-32 NYLOCK NUT

1/4"-20 NYLOCK NUT

VELCRO TABS

NYLON TIE

THERMAL SLEEVE

12-12

2554

– 2 Corner

™

3055