AlcoLimit Enforcer 3 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba AlcoLimit Enforcer 3. AlcoLimit Enforcer 3 16 páginas.

Turning on the power

First, place 2xAA batteries (supplied) into your ALCOLIMIT Enforcer 3 in the

correct direction as marked on the battery cover.

Be sure to use high quality alkaline batteries (preferably Duracell). We

recommend removing the batteries while the unit is in storage to prevent them going flat. High

quality 1.5V Alkaline batteries must be used. Rechargeable batteries will not work as they are

a lower voltage.

Your Enforcer 3 can be operated in two modes:

Normal mode will display digital readings

Fast mode will simply display '0', 'Lo' or 'Hi'.

To turn on hold down the on/off button, and you will first see a number

representing the usage counter of the Enforcer 3. Then it will cycle between

and

button. (i.e. if you want to use it in normal mode release the on/off button when

is on the screen).

Normal mode is also the default mode of operation when the unit is turned on by

holding the button down briefly.

To operate in normal mode:

Depress the on/off button for 2 seconds or until

process will start and countdown from

Insert a mouthpiece into the unit. Once

beep.

USAGE

and the usage counter, and so on until you release the on/off

(i.e. 0.032%BAC)

appear. The countdown

appears you will hear a double

Enforcer 3

pg-5