AlcoLimit VIVID ALCO-076 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba AlcoLimit VIVID ALCO-076. AlcoLimit VIVID ALCO-076 12 páginas. Digital breathalyser

Imprimir página

VIVID

AlcoLimit

USAGE

First, place 2xAAA alkaline batteries (supplied) into your ALCOLIMIT VIVID.

Slide the battery compartment cover downwards to remove.

Ensure the batteries are inserted in the correct direction.

1. To turn your ALCOLIMIT VIVID on, depress the ON/OFF button for 2 seconds until the

screen turns on.

2. The unit will commence a warm-up process.

Purge cycles and circuit tests are taking place during this time. This process generally takes 30

seconds but can last 2 minutes. Dashes will dance around the screen while the unit is warm-

ing up.

3. The unit is ready when two beeps sound and a '

will appear on the display.

If you don't blow into the breathalyser within 20 seconds the word 'Out' will appear and you

must restart the breathalyser.

4. Attach the mouthpiece tube and blow one consistent deep breath into the

sensor. There will be a beeping noise while you are blowing.

A full lung of air is required. Once your ALCOLIMIT VIVID has received enough airflow you

will hear a double click signalling you to stop.

Flo

If inadequate airflow is received, the word

will appear on the screen. Do not block the air

hole on the opposite side of the mouthpiece while testing as this will affect the airflow.

5. A circling line will appear on the display while the breathalyser is analysing your breath

sample. Your %BAC result will then be displayed on the screen.

The display shows only 3 digits to the right of the decimal place.

For example '050' indicates '0.050%BAC

-5