ALcom CL-3121 IDM Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Teléfono inalámbrico ALcom CL-3121 IDM. ALcom CL-3121 IDM 13 páginas. Ultra clear long range caller id cordless phone

Imprimir página
PAGE 8
2-C. Settings
Clock set
s
t
In the standby mode, press
or
button until the
s
and the month digits will flash, use
or
confirm and meanwhile enter the next item setting, the sequence is month - date - hour - minute
-second, press
SET/VOL.
button again to exit and you will hear a confirmation tone. (
on base unit)
NOTE:
When receiving a FSK Caller ID signal, the time will be auto set.
Ringer melody selection
(Only cordless handset can be set)
s
t
In the standby mode, press
or
button until the
to enter the ringer melody selection, use
SET/VOL.
button to confirm and exit.
Ringer volume selection
(Only cordless handset can be set)
In the standby mode, press
SET/VOL.
button and the LCD will show RING 1 or 2, press
button again to select another value, and then wait to exit to standby mode.
LCD contrast setting
(Only cordless handset can be set)
s
t
In the standby mode, press
or
button until the
s
t
to enter the contrast setting, use
or
button to confirm and exit.
Hearing volume selection
(only the cordless handset can be set)
In talk mode, press
SET/VOL.
button to select the talk volume high (
Speaker volume select
(only the base unit can be set)
In speaker mode, press
VOL.
button to select the speaker volume.(up to 4 levels)
Area code filter
(Only base unit can be set, and it is not applicable for use in
In standby mode:
s
t
1. Press
or
button until the
icon flashes on the LCD.
2. Press
SET
button, then the LCD will show ON or OFF, use
press
SET
button to confirm. If you set to ON, press
using the key pad, dial the area code number (up to 6 digits) you want to store, press
delete the previous digit.
3. Press
SET
button, now the number has been stored.
E.g. : If you store the area code number 0592, and the incoming call number is 05926036442, the LCD
only shows 6036442.
PART 2: Telephone operations
icon flashes, then press
SET/VOL.
t
button to set the month, press
SET/VOL.
icon flashes, then press
SET/VOL.
s
t
or
button to select(up to 16 kinds and OFF), press
icon flashes, then press
SET/VOL.
button to select the contrast level 1~4, press
) or low (
s
t
or
button to select the other state,
SET
button again to set the area code number,
PART 3: Special functions
PART 3: Special functions
3-A. Transferring calls
button
button to
This feature allows you to transfer a call from base speakerphone to base handset or vice versa
from base unit to cordless handset or vice versa and between cordless handsets.
SET
button
Transferring Calls between Base Speakerphone and Base Handset
During a phone conversation with handset , press
the handset to transfer calls to speakerphone. To resume conversation with handset, simply
button
pick up the handset.
Transferring Calls (Base unit to Cordless Handset)
1). In talk mode, press
SET/VOL.
hold and make music sounds to the other end. The cordless handset and base unit will ring.
2). If the cordless handset user does not answer, press
.(Base Unit User)
button
3). The cordless handset user can press any key to answer the call automatically after receiving
SET/VOL.
the transfer ring.
4). If the cordless handset user does not respond within 25 seconds, the line will disconnect
automatically.
).
NOTE:
No intercommunication is possible during call transfer.
Transferring Calls (Cordless Handset to Base unit)
1). Press
INT/TRANS.
base unit will ring.
Singapore)
2). Press
TALK/ST-BY
Handset User)
3). Press
SPEAKERPHONE
DEL
button to
User).
4). If the base unit does not respond within 25 seconds, the line will disconnect automatically.
SPEAKERPHONE
INT
button then the handset number. The outside line will be on
INT
button then key on the cordless handset, then the cordless handset and
0
key to return to the call if the base unit user does not respond. (Cordless
button or pick up the corded handset to answer the call. (Base Unit
PAGE 13
button and then hang up
button again to return to the call