ALcom AT5933 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Teléfono ALcom AT5933. ALcom AT5933 12 páginas.

4. Repeat the above steps for the rest code setting.

Adjusting LCD Contrast

1. After setting up the local area code, press SET key, LCD display LCD 08

2. Press UP/+ or DOWN/- key to adjust the LCD contrast, total 16 levels can be selected.

3. Press SET key to confirm and exit.

Alternatively at on-hook state, press FLASH/÷ key to enter LCD contrast setting directly,

then press FLASH/÷ key continuously to adjust the LCD contrast.

Setting Alarm Clock

1. In on-hook state, press ALARM key once, LCD displays 12-00 AL1,

2. Press UP/+ or DOWN/- key to select ON or OFF. LCD displays "ALM" icon when the alarm is

set to ON.

3. Press SET key, value "12" starts to flash.

4. Press UP/+ or DOWN/- key to set the alarm hour and press SET key to confirm and enter

alarm minute setting.

5. Press UP/+ or DOWN/- key to edit alarm minute and press SET key to confirm and go to next

group alarm clock setting.

6. Repeat the above steps to set additional alarms.

NOTE: The first 3 groups alarm clock will be repeated periodically every day while the last 2

groups alarm clock is effected one time.

SETTING PAGE NUMBER FOR CALL TRANSFER

Setting paging number for phones connected in parallel.

1. In ON-HOOK state, press and hold SET key, LCD displays EL--

" * "

2. Key in

and paging number

3. Press SET key to confirm and exit.

4. To Remove Page number please repeat step 1 and press DEL.

CALL TRANSFER BETWEEN PARALLEL PHONES

Transferring an Incoming Call to paralleled phones with Intercom

When a call comes pick up handset or press H.F. button from the first unit, then Press

paging number(

1 or 2)

press H.F key on the second unit to have intercom conversation. Outside caller, first unit user and

second unit user will be connected with each other in conversation. First unit user may disconnect

the call so the second unit user and outside caller can continue the conversation or vice versa.

Important Notes

• Only incoming calls can be transferred using this function.

• Please use same model phones to use the above Call Transfer features. If different

model phone is connected in parallel, page number cannot be set and only can

(example * 1 or * 2)

that was set in the second unit, and that unit will ring. Pick up handset or

, use DEL key to edit.

" * "

and