Ergo In Demand KTG-220 Manual de instrucciones de instalación - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bastidores y soportes Ergo In Demand KTG-220. Ergo In Demand KTG-220 8 páginas. Horizontal and vertical table stands and accessories

Imprimir página

Model: KTG-Series

M4 x 12mm Phillips Pan Head Screw (30)

Display

Figure 6: Prepare Display

(20, 30)

Centris Head

Figure 7: Hang Display

Centris Head

(20, 30)

(160)

Figure 8: Secure Display to Centris Bracket

Attach Centris Head to Recessed Mount Display

NOTE: Refer to Table 1 to select the applicable screw

and spacer combination.

1. Uninstall end lock using the 5/32" hex key (120).

(see Figure 9)

2. Remove Centris head from array rail (20, 30).

Square Nut

End Lock

Display

(20, 30)

Figure 10: Slide Centris Bracket off Array Rail

3. Place display face down on a clean dry surface.

Display

4. Place four 3/8" or 3/4" nylon spacers (190 or 200)

over four mounting holes in display back (see Figure

11).

5. Align Centris head mounting holes with four nylon

spacers (see Figure 11).

6. Secure Centris head to display using four

M4 x 20mm Phillips pan head screws (170), or four

M4 x 30mm Phillips pan head screws (180)

(see Figure 11).

Installation Instructions

Centris Head

Figure 9: Remove End Lock(s)

(20, 30)

Centris Head