Direct Healthcare Group 56-271 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Silla de ruedas Direct Healthcare Group 56-271. Direct Healthcare Group 56-271 20 páginas.

Imprimir página

20. Maintenance

The chair is made from stainless steel/powder coated tubing and aluminium.

Exposed, unpainted parts are made of aluminium or stainless steel. Make sure the

product feels firm and stable – no fasteners may be loose. Damaged or defective

parts should be replaced as soon as possible.

Cleaning, general

•

Clean the chair by wiping with regular cleaning agent (NOT Pentanol based) or

use a washer/autoclave (max 85 C).

•

Remove the seat and clean it separately or use a washer/autoclave (max 85 C).

NOTE: The remote control/control box (or the connector/

female connector if the remote control is removed before

washing) must be protected from high pressure water.

Use a plastic bag or similar that can withstand washer water pressure.

Place the remote control/control box or the connector/female

connector so that running watercannot force its way in.

•

Clean the pillars with detergent/disinfectants

commonly used in healthcare (alcohol-based).

•

Make sure the protective cover is installed at the

bottom of each pillar.

Special checks (at least once per year)

1. Armrest – check that slip protection/wrist protection

are intact and secured.

2. Pillars (electric actuator/raise-lower) + electric actuator/

tilt: check the function of the remote control and that

the electric actuator attachment devices are not loose.

3. Seat/stopped seat – whole and without cracks. No sharp edges may be

present.

4. Footrest platforms – whole and adjustable in the intended manner. Check that

the clips are whole and properly fastened. Heel restraints must be in position at

the back of each footrest platform.

5. Wheels – may not be stiff or loose. Also check that the brakes work.

Back strap; the back strap must be intact and may not have any holes or other

damage to the belts and anchors.

21. Technical Specifications

Material

Aluminium

Plastic (PP, PP/GS, PA, PA/GS, TPE, Silicone)

Textile Dartex

Foam (PUR)

Steel (Stainless)

Frame / stand Powder coating (polyester)

Specification power system

EA S Y H I G H B A C K

DIREC TH EA LTH C A R E G R O U P.C O M