ErgoCentric Synchro geoCentric Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Mobiliario interior ErgoCentric Synchro geoCentric. ErgoCentric Synchro geoCentric 10 páginas.
Imprimir página
SPRING TENSION - To adjust the spring tension,
turn the KNOB located under the front left corner
of the seat. Turn the knob clockwise to decrease
the spring tension and counter-clockwise to
increase the spring tension.
FREE FLOAT - To free float the chair, push down
on the CIRCULAR paddle and lean back against
the backrest to disengage the safety lock. To
lock the chair pull up on the CIRCULAR paddle.
SEAT DEPTH - To adjust the seat depth, pull up on
the DIAMOND paddle with your left hand and move
the seat in relation to the backrest by shifting your
weight forward or backward while holding the
backrest with your right hand. Push down on the
diamond shaped paddle to lock the seat in place.
BACK HEIGHT - To adjust the back height, push
the OVAL paddle back away from the seat and
adjust the backrest up or down to the desired
height. Pull this paddle down and towards the
seat to lock.
Top View
Backrest
SEAT HEIGHT - To raise the seat, pull up on the
SQUARE paddle while raising your weight off the
chair. To lower the seat, pull up on the paddle
while sitting. Release the paddle to lock.
BACK ANGLE - To adjust the back angle, pull up on
the TRIANGULAR paddle and hold it in the up position.
Lean backward or forward until the backrest is at the
desired angle. Release the paddle to lock. When
adjusted correctly the angle between your upper body
and thighs should be greater than 90 degrees.