Alcovisor Jupiter Manual - Página 4

Navegue en línea o descargue pdf Manual para Instrumentos de medida Alcovisor Jupiter. Alcovisor Jupiter 8 páginas.
También para Alcovisor Jupiter: Manual de instrucciones (12 páginas), Manual de instrucciones (12 páginas)

Imprimir página

ii. Left boxes: the fields needed to be shown and printed

iii. Right boxes 1: the previous data inputted will be kept until the

user changes it.

iv. Right box 2: set compulsory entry.

v. Touching the name of the field to change it.

vi. A header of the printout can be set by entering the words in the

field "Header".

7. Alert: Allows user to choose a BAC point where result will display in

RED and beep. User selects the value (0.000 to 0.100%) and any

test result at or above this value will display in red.

8. Blanklock: The password to access the Blanklock option is 118118.

This optional lockout/timer will cause the Jupiter to begin a 15-minute

countdown timer when a breath sample with a result of 0.020 % or

higher is detected. To turn on this feature, enter Blanklock and select

Yes. To turn off this feature, enter Blanklock and select No.

9. Calibration: The password to access the calibration option is

119119. Please refer to the calibration instructions included in this

manual for proper calibration procedures.

10.

Calibration Period:

a. Select the number of days in the first column and number of tests in

the second column that may be allowed to occur before calibration

is needed.

b. Select "LOCK" to lock the device if calibration is needed.

c. Default is 360 days, 700 tests and unlocked.

PAS recommends all Jupiter units be calibrated annually or whenever an accuracy

test shows that BAC readings are no longer within tolerance limits. Because precise

calibration is crucial, it can be performed only by PAS Systems International or by

persons who have been properly trained for alcohol detector calibration. (Calibration

of the Jupiter must be performed using a NHTSA-approved wet bath simulator or

certified dry gas standard.) Successful completion of calibration should be recorded

in a calibration log.

Calibration