ABB RER103-MM Descripción técnica - Página 4
Navegue en línea o descargue pdf Descripción técnica para Unidad de control ABB RER103-MM. ABB RER103-MM 9 páginas. Bus connection module
1MRS750532-MUM
1
Product Description
Sub Title
Manual Type
General
The bus connection module RER 103 acts as an interfacing unit between an RE_ 500
device and the fibre-optic SPA, LON
connection module converts incoming optical signals from the SPA, LON
IEC_103 bus to electrical RS-485 signals for the RE_ 500 devices and vice versa.
The module is plugged into the RS-485 D-type subminiature connector on the rear
plate of the RE_500 device. It can be used together with any RE_500 device
provided with a 9-pin D-type connector. The bus connection module is powered
from the D-type connector of the RE_500 device.
RER 103 contains a Service Pin for LON
connection module RER 103 is shown in figure below.
LON / SPA
CD A 5
RTS B 4
RTS A 3
DATA B 2
DATA A 1
Fig. 1.-1 9-pin D-type connector and block diagram
®
and IEC 60870-5-103 bus. The bus
®
nodes. The RS-485 interface of the bus
LON / SPA
9 +5 V in
8 Service Pin
7 GND
6 CD B
9n_dliit
Product Type
®
Tx
Rx
RS485
RER 103
D9P-connector
rer103block
and
5