Clarion UNGO MS2106 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Alarma de coche Clarion UNGO MS2106. Clarion UNGO MS2106 16 páginas. Clarion ungo car security system user manual ms2106

Imprimir página
Clarion UNGO MS2106 Manual del usuario
4. User Selectable Programming Options
The Ungo MS2106 features a user selectable programming table allowing simple
adjustments to match the user's preferences.
User Programming Options Table
Feature
1.
Arming Mode
2.
Auto Rearm
3.
Arming Chirps
4.
Ignition Controlled Door Locking
5.
Ignition Controlled Door Unlocking
6.
Override Code Programming
7.
Remote Start in Valet Mode
8.
Automatic Starting
Steps 7 & 8 are reserved for use with Ungo-Net Start Module.
4.1 User Programmable Options
1. Arming Mode: Selects whether or not the system will automatically Arm when
ignition is turned off.
2. Auto Rearming: Selects whether or not the security system will rearm if no
activity is detected after Remote Disarming. (If Passive Door Locking feature
was selected during installation, the system will also relock the doors.)
Automatic Rearming only takes place if the system was Armed (actively or
passively) for at least 10 seconds and then remotely disarmed.
3. Arming Chirps: Selects whether or not the security system will chirp when arm
and disarmed.
4. Ignition Controlled Door Locking: Selects whether or not the doors will lock
when the ignition is turned On. Ignition Controlled Door Locks will automatically
lock the doors 10 seconds after the ignition is turned On. To prevent the keys
from being locked inside the vehicle; the security system will not lock the doors
if any of the doors is open when the ignition is turned On.
5. Ignition Controlled Door Unlocking: Selects whether or not the security
system the doors will unlock when the ignition is turned Off. Ignition Controlled
Door Unlocking can be configured to unlock all the doors or driver's door only.
6. Override Code Programming: Selects the number of times the Valet button
must be depressed to override the system. The Override Code can be any
number between 1 and 15. (Default setting is 1)
Button 1 (default) Button 2
Active
Passive
On
Off
Normal
Silent
On
Off
All Doors
Driver's Door
Code Set
Enabled
Disabled
Disabled
Temperature Start
11
Button 3
Off
Voltage Start