Xerox 3400B - Phaser B/W Laser Printer Manual de referencia - Página 17

Navegue en línea o descargue pdf Manual de referencia para Impresora Xerox 3400B - Phaser B/W Laser Printer. Xerox 3400B - Phaser B/W Laser Printer 26 páginas. Network guide
También para Xerox 3400B - Phaser B/W Laser Printer: Folleto (4 páginas), Manual de la red (21 páginas)

Imprimir página

Print Quality

Print Quality
Irregular faded patches of print
Be sure to use paper supported by the printer; refer to the Phaser 3400 Personal Laser
I
Printer User Guide for more information.
Toner may be unevenly distributed. Remove the laser print cartridge, shake it gently
I
to evenly distribute the toner, then reinsert the cartridge into the printer.
Graphics faded
Toner may be low. Remove the laser print cartridge, shake it gently to evenly
I
distribute the toner, then reinsert the cartridge in the printer.
If the problem persists, insert a new laser print cartridge.
I
Black stains
Be sure to use paper supported by the printer; refer to the Phaser 3400 Personal Laser
I
Printer User Guide for more information.
The printer may require a print-quality adjustment. Press and hold the control panel's
I
Print button for 10 seconds (until all lights remain steadily lighted) then release the
button. The printer performs the print-quality adjustment and prints a cleaning sheet.
Character voids
The paper may be too dry. Try printing with paper from a new package.
I
Background scatter
The paper may be too damp. Try printing with a different batch of paper. Do not open
I
packages of paper until needed so that the paper does not absorb moisture from the
air.
The printing surface may be uneven. For example, if printing on envelopes, try
I
changing the layout of the image to avoid printing over areas that have overlapping
seams on the reverse side.
Missing characters or data
The paper may be too damp. Try printing with a different batch of paper. Do not open
I
packages of paper until needed so that the paper does not absorb moisture from the
air.
This may be due to differences in vector mode versus raster mode. Try changing the
I
graphics mode in the printer driver before re-printing the job.
Back of the printout is dirty
The transfer roller may be dirty. Print a few blank pages to clean the transfer roller.
I
12
Phaser 3400 Personal Laser Printer