Xerox 6200DX - Phaser Color Laser Printer Manual de solución de problemas - Página 11

Navegue en línea o descargue pdf Manual de solución de problemas para Impresora Xerox 6200DX - Phaser Color Laser Printer. Xerox 6200DX - Phaser Color Laser Printer 42 páginas. Specialty printing phaser 6200 series
También para Xerox 6200DX - Phaser Color Laser Printer: Folleto y especificaciones (4 páginas), Manual de la red (50 páginas), Manual de configuración y referencia rápida (49 páginas), Manual en papel (27 páginas), Manual de instrucciones de instalación (12 páginas), Manual de apoyo (26 páginas), Especificación (12 páginas)

Imprimir página

Problem

Printing Is Too Light or Too Dark

in All Colors

Transparency Print Quality

Possible Print Quality defects occurring on

Transparency media such as:

Light and/or Dark spots

Smeared Toner

Light Bands on print

See www.xerox.com/officeprinting/infoSMART on the world wide web for more on-line support information.

Page 3 of 3

Solution

1. Try a different Color Matching mode. From the printer's front

panel

Support Menu

select

Print-Quality Tips

Note:

The TekColor Correction set to Automatic provides the

best results for most documents.

2. If the print is too light, verify that the printer driver Print

Quality Mode or Front Panel Defaults is not set to Draft

Mode.

3. Adjust the light or darkness levels. From the front panel

Support Menu

select

Calibrate Colors

Menu, then selet

the procedure for

Lighten/Darken Colors.

Use only Phaser

6200 Transparency.

Using non-Phaser

6200 Transparencies may cause print-

quality problems or damage the printer's Fuser.

Damage caused by using non-supported media will not be

covered under the warranty, service agreement or Total

Satisfaction Guarantee.

For a list of Transparency part numbers, refer to the printer's

Paper Tips

Page.

select

Improve Print

Quality?, then

Page. and press OK.

Improve Print

Quality?, then select

Print Tutorial

Page. Follow