3Com Oven Notas de publicación - Página 2

Navegue en línea o descargue pdf Notas de publicación para Hardware de red 3Com Oven. 3Com Oven 16 páginas. 3com oven user manual

Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3

The 3Com Asterisk Appliance is a stand-alone PBX, which runs a specially enhanced version of

the Asterisk software. It is suitable for the desktop or mounting in a typical network closet or

restricted access location. The 3Com Asterisk Appliance is ideal for small office environments.

The 3Com Asterisk Appliance can function not only as a PBX, but also as a voice mail server,

IVR server, conferencing server, VoIP ATA, or VoIP gateway. It has four FXO ports and four

FXS analog ports. Additionally, the built-in four port LAN switch and WAN port allow it to serve

as a basic router.

See the 3Com Partner Access web site or the 3Com ftp site for additional information and

resources for the 3Com Asterisk Appliance, such as:

A README file that augments the information in this document.

The firmware, bootloader, and 3Com telephone images.

The CompactFlash Image and its corresponding README file.

Time zone files, which you down load using the Networking page in the 3Com AsteriskGUI.

Follow the instructions in the 3Com Asterisk Appliance Administrator's Guide to set the time

zone for your appliance.

The 3Com Asterisk Appliance Administrator's Guide.

The 3Com Service FAQs (frequently asked questions) site provides additional information about

3Com Asterisk. Point your browser to

drop-down menu. Check this site frequently for new FAQs.

For information about using 3Com Asterisk with 3Com telephones, point your browser to

http://www.3com.com/downloads. Enter the product number, 3CR10551A, and then click the

Search button.

As always, address all questions about the 3Com Asterisk Appliance and related hardware and

software to your authorized 3Com reseller.

Important Information

Release 1.4.0.14.3 includes new 3Com Asterisk Appliance firmware and telephone images. To

update the 3Com Asterisk Appliance to Release 1.4.0.14.3, see

Appliance Configuration

Skip the section that describes how to update the bootloader image. Because Release

1.4.0.14.3 does not include a new bootloader image, there is no need to update the image.

Update the 3Com Asterisk Appliance firmware to Release 1.4.0.14.3. Follow the steps in the

Updating the 3Com Asterisk Appliance Firmware Image

uImage-dgm-1.0.3.2-3com-r1.4.0.14.3

Update the telephone image to Release R_7_1_47_3. Follow the steps in the

Telephone Image Files

phone_image_R_7_1_47_3.tar.gz.

http://servicefaq.3com.com

and do the following:

section. The telephone image file is

and select Asterisk from the

Updating Your 3Com Asterisk

section. The firmware image file is

Page 2

Updating the