Xerox Versant 2100 Press Expectativas del cliente y manual de instalación - Página 47

Navegue en línea o descargue pdf Expectativas del cliente y manual de instalación para Impresora Xerox Versant 2100 Press. Xerox Versant 2100 Press 49 páginas. Entry production color presses
También para Xerox Versant 2100 Press: Manual de seguridad (45 páginas)

Imprimir página

Xerox Versant 2100 Press Expectativas del cliente y manual de instalación

1. Electrical Requirements

Operational Considerations

Envelopes

Envelope

Size

Monarch

3.875 x 7.5 inches

#10

4.125 x 9.5 inches

229 x 324 mm

162 x 229 mm

Envelope Feeding Guidelines and Limitations

 Other size envelopes can be used, but performance is not guaranteed.

 Envelopes should be loaded in the feed direction shown in the table above, and must be run simplex only.

 The recommended tray for printing envelopes is the Bypass Tray – Tray 5. Recommended capacity is 30-40 envelopes. Capacity may vary based on envelope

type and manufacturer.

 Tray 6 or Tray 7 can be used if the Postcard Bracket is mounted and the stack height is limited to no more than 100 envelopes. Capacity may vary based on

envelope type and manufacturer.

 Always load envelopes with the flaps closed and flaps faced down.

 When loading SEF, place the flaps facing the front of the press;

When loading LEF, place the flaps facing the lead edge.

 When submitting your print file, select a custom paper as the Paper Type and enter the dimensions of the envelope. The Width is measured from the lead

edge to the trail edge of the envelope. This means that if you are loading the envelope SEF, you should enter the long dimension of the envelope as the

Width. If you are loading the envelope LEF, you should enter the short dimension of the envelope as the Width.

 Enter a heavy weight for the media, such as 176 gsm or greater for 24lb envelopes. Best results will vary based on envelope type and manufacturer.

 Select the Bypass Tray as the Paper Source.

 Do not use padded envelopes.

 Store unused envelopes in their original packaging to avoid the excess moisture or dryness which can affect print quality and cause wrinkling. Excessive

moisture can cause the envelopes to seal before or during printing.

 Some wrinkling or embossing may occur when printing on envelopes. Successful envelope printing depends on the quality and construction of the envelopes.

Try another envelope brand if problems occur.

 Greater image registration variance may be experienced on envelopes.

 Removal of the envelopes from the top tray is recommended to minimize poor stack quality and possible jams.

 Envelopes can only be output to the OCT or the top tray of the Standard finishers.

Customer Expectation and Installation Guide

Feed Direction

Short Edge Feed (SEF)

Short Edge Feed (SEF) or Long Edge Feed (LEF)

Xerox Confidential

Xerox

Versant™ 2100 Press