Xerox 4250 - WorkCentre - Copier Manual de uso rápido - Página 15

Navegue en línea o descargue pdf Manual de uso rápido para Impresora todo en uno Xerox 4250 - WorkCentre - Copier. Xerox 4250 - WorkCentre - Copier 42 páginas. A4 black and white multifunction system
También para Xerox 4250 - WorkCentre - Copier: Características (1 páginas), Especificaciones (8 páginas), Manual del evaluador (16 páginas), Manual complementario (1 páginas), Folleto y especificaciones (4 páginas), Manual del evaluador (16 páginas), Especificaciones (4 páginas), Instalación y funcionamiento seguros (4 páginas), Manual de servicio (13 páginas)

•

Press the Machine Status button then select Tools > Connectivity and

Network Setup > Advanced > Network Setting > Network Setup > TCP/IP

Options > TCP/IP Settings.

•

The allocated TCP/IP address is in the Name/Address field.

Confirm that an IP address has been allocated and that it is an appropriate IP

address for your network.

NOTE:

If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly

allocated an address or DHCP is not enabled on your network. Contact your network

administrator for assistance.

Network Setup Using a Static IP Address

Before you begin, obtain the following information from your network administrator:

•

IP Address

•

Gateway Address

•

Subnet Mask

•

DNS Server Address

Press the Log In/Out button on the

Control Panel, enter the Administrator's

Password [1111] and select Enter.

Press the Machine Status button then

select Tools > Connectivity and

Network Setup > Advanced > Network

Setting > Network Setup > TCP/IP

Options.

Select HTTP and Enable. Select Save.

Select TCP/IP Settings.

Select the Dynamic Addressing button.

By default, DHCP will be selected. Select

Disabled to disable DHCP and select Save.

Select Name/Address. Enter the Host Name, by selecting the Keyboard symbol.

Enter the IP Address by touching each box and entering the number using the

Numeric Keypad. Select Save.

Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select Save.

If you do not wish to configure DNS settings proceed to the next step. If you wish to

configure DNS settings select the DNS Configuration button. Enter the Domain

Name and the Preferred DNS Server address. Select Save.

The static IP address is now set. Press the Log In/Out button and select Confirm to

logout and close the Tools menu.

quick use guide