Xerox 4250 - WorkCentre - Copier Manual de uso rápido - Página 9

Navegue en línea o descargue pdf Manual de uso rápido para Impresora todo en uno Xerox 4250 - WorkCentre - Copier. Xerox 4250 - WorkCentre - Copier 42 páginas. A4 black and white multifunction system
También para Xerox 4250 - WorkCentre - Copier: Características (1 páginas), Especificaciones (8 páginas), Manual del evaluador (16 páginas), Manual complementario (1 páginas), Folleto y especificaciones (4 páginas), Manual del evaluador (16 páginas), Especificaciones (4 páginas), Instalación y funcionamiento seguros (4 páginas), Manual de servicio (13 páginas)

Switch On the Machine

Once the machine has been assembled it must be configured. This is done using the

Product Enablement Key when the machine is switched on for the first time.

The Product Enablement Key is

delivered in a plastic tube inside the

box with the machine. The procedure

to configure the machine is as

follows:

Locate the tube containing the

Product Enablement Key. Remove

the plastic card and carefully press

out the key.

Connect the Power cord to the machine and a suitable power supply outlet.

Switch on the machine.

Install the Product Enablement Key into the Card Reader Slot at the back of the

machine.

Card Reader slot

The Language Default screen will be displayed. Select your chosen language and

then select Save.

The Installation Wizard screen will be displayed. Select Next.

The Product Enablement Settings screen will be displayed. Follow the instructions on

the screen.

NOTE:

When the Green LED light stops blinking and remains on continuously (about

10 seconds), the configuration is successful.

Remove the Product Enablement Key and select Next on the display.

quick use guide

Green LED

Product Enablement Key